What Causes an Ice Maker to Stop Working?
It is frustrating to find that your ice maker is not working properly. You love using it and you just want it to work when the cold weather hits and you have to go out to enjoy the weather with your family. The good news is that sometimes simple problems can be fixed. Before you try to fix it yourself, you should make sure that the problem is a hardware problem. If the problem is a software problem then you will have to call the manufacturer and get them to send someone out to take a look at your machine.
If the ice maker is sticking to the pipes under the cold tap, then this is most likely a blockage in the cold water supply. You can easily clear this up by simply running some water through the pipes and clearing away any blockage. If the machine is giving you issues around the water level and not draining properly, then you may have a leaky faucet somewhere. You can simple replace the part or check for leaks. Leaks can cause water to leak into your machine and not enough water could be flowing causing it to freeze.
When your ice maker is freezing up, the best thing to do is try to open the valve to the water and see if it comes back on. If it does not, then you need to take the unit under the heating coil and check to see how far down the line it is going. Sometimes refrigeration leaks are so small that they can be undetectable. However, a major repair is needed. If the water supply is not the problem, then you will have to take the machine apart and clean all of the parts inside. Palm Beach icemaker repair
If you are having trouble making ice because the machine is not producing enough, then it may be a problem with the condenser. If there is a buildup of dirt and debris inside of the condenser, it can cause the machine not to turn off correctly. You will need to take apart the machine and clean out all of the parts inside. This is the best way to determine what is causing the problem.
If the problem is a clogged ice bin, then remove the contents and clean them thoroughly. You will need to check the drain line as well as the overflow hole. If this is the case, you will have to purchase new ice bins. You will want to make sure that the holes are big enough for the ice to flow through before you place the new ones in the freezer.
Another common problem is that the ice making pump is not operating properly. The motor will often have to be replaced and the problem can usually be fixed by just changing the water. There may also be a problem with the pipes that carry the water from the heater and into the house. This is something that you can fix yourself if you have access to the part of the house that the water comes out of.
When you have checked the pipes and motor, then you are going to need to turn the machine off. You may need to do this while the water is still running as well. Once the water is off, you should run a couple of coats of anti-freeze all over the interior and exterior of the machine. This is going to prevent any freezing up of the water that you are trying to produce.
What causes an ice maker to stop working? When you find that the problem is a clogged ice bin, you are going to have to replace the bin with one that is larger. A frozen pipe or overflowing drainage hole is the most common problem. To prevent these problems from occurring, you will need to follow all of the maintenance instructions that come with the machine.
Comments
Post a Comment